Tellurium Q Statement II Tone Arm Phono RCA Cable

The Ultimate Connection Between Vinyl and Music

The Tellurium Q Statement II Tone Arm Phono RCA Cable is a flagship analogue phono interconnect developed specifically for use between a turntable fitted with RCA output connectors and a compatible phono stage.

Designed for some of the most demanding vinyl playback systems, Statement II brings Tellurium Q’s highest performance philosophy to the delicate connection carrying the output of a phono cartridge.

In high-end analogue reproduction, extraordinary musical information begins at the stylus. The finest variations in groove modulation become tiny electrical signals that must travel to the phono preamplifier for accurate amplification and equalisation.

The Statement II Tone Arm RCA cable is intended to preserve the integrity of that connection, combining the manufacturer’s philosophy of transparency, naturalness, spatial realism and musical coherence.

Engineered Specifically for Phono Signals

A phono cartridge normally produces a much smaller electrical signal than a conventional line-level audio component.

Moving magnet and moving coil cartridges also present different electrical requirements, making the relationship between the cartridge, cable and phono stage particularly important.

For moving magnet cartridges, cable capacitance can contribute to the total capacitive load seen by the cartridge and may influence frequency response.

Moving coil cartridges typically present different loading considerations, depending on their electrical characteristics and the input configuration of the phono preamplifier.

Cable construction, connection integrity, routing and grounding can also affect the system’s susceptibility to hum and interference.

The Tellurium Q Statement II Tone Arm Cable is specifically designated by the manufacturer for this phono application.

The Statement II Engineering Philosophy

Tellurium Q approaches cable development through a combination of material selection, electrical considerations, mechanical construction and extensive evaluation.

Rather than focusing on a single conductor specification, the manufacturer considers the complete cable assembly and the interaction between its various design elements.

The company’s research emphasises signal timing, phase relationships and the preservation of natural musical information.

Statement II represents a later development of the manufacturer’s original Statement cable philosophy, incorporating further refinement of construction and performance.

The precise conductor composition, shielding structure and electrical values of this particular model are not fully published. For this reason, capacitance, resistance and other numerical specifications should not be assumed without manufacturer confirmation.

Protecting the Musical Information in the Groove

The output of a high-performance phono cartridge contains subtle dynamic changes, harmonic relationships and acoustic information originating from the recording.

The purpose of a dedicated phono interconnect is to provide an electrically suitable connection between cartridge output wiring and the phono preamplifier.

Statement II combines this specific application with Tellurium Q’s flagship sonic philosophy: natural tonal balance, exceptional transparency and effortless musical expression.

Published reviews of the Statement phono cable family have highlighted perceived improvements in musical detail, instrumental expression and the reproduction of subtle acoustic information.

The Statement II Musical Presentation

The following descriptions reflect the manufacturer’s Statement family performance philosophy and the subjective observations of reviewers. The actual performance will depend on the cartridge, turntable, phono stage, loading and electrical environment.

Exceptional Low-Level Detail

One of the most frequently praised qualities of Statement cables is the ability to communicate low-level musical information naturally.

Delicate instrumental overtones, acoustic decay and subtle expressive variations contribute to the perceived realism of analogue playback.

The Statement philosophy aims to reveal this information without creating an artificially analytical presentation.

Natural Vocals and Harmonic Richness

The natural reproduction of voices and acoustic instruments is central to Tellurium Q’s design philosophy.

Reviewers of the Statement range have praised its smooth midrange, expressive detail and the convincing presence of performers.

For demanding vinyl listeners, preserving these qualities is an essential part of a believable musical presentation.

Rhythmic Precision and Dynamic Expression

Vinyl recordings can reproduce delicate changes in musical intensity and timing, from the lightest percussion to powerful orchestral passages.

Statement cables have received recognition for their combination of focus, control and dynamic freedom.

The intended result is a presentation that feels naturally expressive rather than constrained or exaggerated.

Three-Dimensional Imaging and Acoustic Space

Spatial realism is another defining characteristic of the wider Statement range.

Published evaluations have described a convincing sense of instrumental placement, acoustic depth and additional clarity in complex musical passages.

The finest recorded ambience should remain part of the musical whole, maintaining a coherent soundstage rather than appearing artificially separated.

Turntable and Phono Stage Compatibility

The Tellurium Q Statement II Tone Arm Phono RCA Cable is designed for the following signal path:

This connection is appropriate only when the turntable and phono stage provide compatible interfaces.

Before ordering, confirm:

• That your turntable provides the required RCA phono output connectors
• That the phono stage has compatible RCA phono inputs
• That the turntable output is suitable for the selected phono-stage input
• That the required grounding arrangement is supported
• That cable length and physical routing are appropriate
• That the phono stage provides appropriate cartridge loading

Some turntables include an internal phono preamplifier and provide a higher-level output. Those connections should not be assumed suitable for this dedicated cable without checking the manufacturer’s guidance.

RCA-RCA vs DIN-RCA Tonearm Connections

Tellurium Q produces different Statement II tonearm cable configurations to accommodate different turntable and tonearm designs.

Statement II RCA-RCA

The present product is intended for compatible turntables with RCA phono output connectors and phono stages with RCA inputs.

Statement II DIN-RCA

The Statement II DIN-to-RCA version is intended for compatible tonearms using a DIN output connection.

The two configurations serve different connector arrangements and should not be considered interchangeable.

International Reviews & Recognition

A celebrated reference cable family for demanding analogue systems.

The Statement phono cable range and broader Statement series have received extensive international recognition. The following evaluations identify the product or cable family reviewed wherever the distinction is relevant.

Statement II Tone Arm Phono RCA Specifications

Statement II vs Silver Diamond Tonearm Cable

The Tellurium Q Silver Diamond Tone Arm RCA-RCA Cable belongs to the manufacturer’s Silver Family and represents a highly accomplished phono interconnect design.

Statement II occupies the flagship performance tier above Silver Diamond in Tellurium Q’s phono cable hierarchy.

It follows the manufacturer’s most ambitious philosophy of transparency, natural tonal accuracy and musical refinement.

The ideal choice depends on the turntable, cartridge, phono stage and listening priorities.

Statement II vs Black Diamond Tonearm Cable

The Tellurium Q Black Diamond Tone Arm Cable belongs to the Black Family, which emphasises smoothness, coherence and natural musical flow.

Statement II occupies a higher performance tier and represents the manufacturer’s flagship approach to analogue signal transmission.

The final selection should consider electrical compatibility as well as the intended sonic character of the complete vinyl playback system.

Statement II Phono RCA vs Standard Statement II RCA

The Tellurium Q Statement II RCA Interconnect and Statement II Tone Arm Phono RCA Cable serve different applications.

The standard Statement II RCA is intended for compatible line-level analogue signals between components such as DACs, preamplifiers and integrated amplifiers.

The Statement II Tone Arm Phono RCA is dedicated to the much lower-level cartridge signal travelling from a turntable to its phono preamplifier.

These products should not be treated as interchangeable simply because both use RCA connectors.

Build a Complete Statement II Audio System

Statement II Speaker Cable

The Tellurium Q Statement II Speaker Cable represents the manufacturer’s flagship loudspeaker cable performance.

Statement II RCA Interconnect

The Tellurium Q Statement II RCA is designed for high-end line-level analogue connections.

Statement II DIN-to-RCA Phono Cable

The Tellurium Q Statement II DIN-to-RCA provides an alternative connection for compatible tonearms with DIN output sockets.

Frequently Asked Questions

What is the Statement II Tone Arm Phono RCA Cable?

It is a flagship phono interconnect designed specifically for compatible RCA connections between a turntable and a phono stage.

What is the official product code?

The official Tellurium Q product code is ST-PHONO.

Can I use it between my DAC and amplifier?

No. Tellurium Q specifies this cable exclusively for turntable-to-phono-stage applications. Use a conventional line-level interconnect for DAC-to-amplifier connections.

Does it include a ground wire?

The official RCA-RCA product image shows a separate grounding lead. Confirm the supplied configuration and its compatibility with your equipment when ordering.

Can I use it with a moving coil cartridge?

Potentially, provided the cartridge, turntable output wiring, phono stage and grounding arrangement are compatible. Electrical loading requirements should be confirmed.

Is it suitable for moving magnet cartridges?

Potentially, but the total capacitive loading of the cartridge should be checked. This includes relevant tonearm wiring, interconnect and phono-stage input capacitance.

Is the RCA-RCA model compatible with a DIN tonearm output?

No. A compatible DIN connection requires the appropriate DIN-to-RCA variant.

Can it replace an ordinary phono RCA cable?

Yes, when the turntable, phono stage, grounding arrangement and cartridge loading are compatible.

Will it eliminate turntable hum?

No cable can guarantee elimination of hum. Correct grounding, cable routing and diagnosis of the electrical system remain important.

What length should I choose?

Choose a practical length that permits proper routing without excessive tension, while taking cartridge and phono-stage electrical requirements into consideration.

How should I connect the ground wire?

Follow the instructions supplied with the turntable and phono stage. Grounding arrangements vary between equipment designs.

Is Statement II the highest-ranking Tellurium Q tonearm cable?

Yes. Statement II belongs to Tellurium Q’s flagship performance family.

Official Manufacturer Information

Explore further manufacturer details and available configurations on the
official Tellurium Q Statement II Tone Arm RCA-RCA page.

Availability and International Orders

Contact Chameleon Audio for cable lengths, current availability, international shipping and personalised advice on matching Statement II to your turntable, cartridge and phono stage.