Origin Live Discovery 2 Phono Stage

SKU: 23563-1 Category: Availability: In Stock

2.200,00 

The Origin Live Discovery 2 Phono Stage offers exceptional vinyl playback with its direct signal path, passive RIAA equalization, and advanced power supply. Designed to enhance detail, transparency, and dynamic range, it supports MM and MC cartridges with impedance as low as 4 ohms. Its meticulous design minimizes signal degradation and maximizes accuracy for an authentic vinyl audio experience.

1 in stock (can be backordered)

Feel Safe Paying With
Excluding speakers & certain second hand items we offer:
  • Free Shipping in Greece for orders over 100€!
  • Free Shipping in Europe for orders over 1000€!
  • Free Shipping Worldwide for orders over 3000€!

Description

Origin Live Discovery 2 Phono Stage

When vinyl is played up to 90% of the total voltage amplification takes place in the phono stage. This makes the phono stage a most critical component in the audio chain.

Most integrated amplifiers and preamplifiers are unable to offer truly high grade vinyl playback because they are built from an understandably small proportion of a total component budget.

Similarly, an integrated amplifier or preamplifier nearly always shares its internal power supplies with a number of analogue, digital and other control systems.

It is not hard to see therefore how the tiny signal from a low output moving coil cartridge, which is 20,000 times smaller than a typical digital signal, can be seriously corrupted.

These reasons are what makes investing in a dedicated high grade phono stage one of the most effective system upgrades.

Purpose

The Origin Live Discovery 2 phono stage is designed to vastly improve on integrated preamplifier limitations by virtue of innovative circuit design, the use of high grade audio components, and a significantly over specified external power supply. It amplifies the output from most moving magnet and moving coil cartridges and couples exceptionally well with coil impedances as low as 4 ohms.

Unlike many other phono stages, the Discovery 2 connects the cartridge directly to the amplification circuitry.

There is no initial DC blocking or filtering in the electrical path to degrade the audio signal before it undergoes enormous amplification close to 100dB at 20Hz.

Sound Quality

The improvements that the Discovery 2 brings to a system are spectacular. An immediate observation is vastly improved speed and timing. This is an important aspect which brings listeners much closer to the original performance.

Other factors are increased transparency, greater dynamics, and improved levels of detail.

A highly neutral tonal balance also means there is excellent imaging capability which leads to the presentation of a 3-dimensional sound stage – so appreciated by those who understand what makes music come alive.

Technical Aspects

The Discovery 2 is a high-performance stand-alone phono preamplifier, meticulously designed and packed with innovative thinking. It exhibits unrivalled sonic qualities with low noise amplification.

Design Philosophy

The phono stage is based on work carried out by Origin Live’s long-established collaboration with highly experienced electronics design engineer Simon Clark, backed by years of auditions and listening tests. It is built around a zero feedback passive equalisation RIAA filter and ultra high-quality amplifier sections.

Each channel is treated separately and the use of high-quality components allows the performance of the circuit to shine through.

For faithful reproduction of the original recording, the RIAA curve is followed as closely as possible, making it flat to the RIAA standard by less than +/- 0.5dB.

Direct Path

Many external high-grade phono stages, even well-known ones, use a single-ended DC power supply for simplicity and cost savings. These designs, almost without exception, need to block DC from the cartridge or else it would be destroyed.

This fundamental design choice requires a capacitor to be placed in line with the cartridge and then right away, before any amplification takes place, the tiny analogue signal is degraded significantly. This degradation, once amplified by up to 4000 times, cannot be extracted from the original audio source.

This is why a direct path from the coil to the amplifier circuit is so important and explains in part the highly transparent sound quality of the Discovery 2.

Passive RIAA

Many phono stage designs incorporate an RIAA filter as part of a feedback loop. It makes sense to do this as the primary purpose of the phono stage is to amplify the cartridge signal whilst applying the RIAA filter.

The problem with this design choice, however, is that the amplifier’s gain becomes frequency dependent and therefore subtle but audible changes are introduced that spread dynamically across the audio spectrum in real-time. The net result is a tendency for such designs to add colouration to the audio signal that reduces its ultimate clarity.

The Origin Live Discovery 2 phono stage keeps the RIAA filter squarely in the passive domain where it naturally corrects the recorded frequency response away from any frequency-based, loop feedback side effects.

Power Supply

Much attention has gone into the power supply design which is critical to faithfully amplify ultra low-level signals. It features several layers of filtration and regulation designed to isolate and create a pure electrical source for signal amplification.

The AC mains is first EMC filtered to remove up to 70dB of unwanted electromagnetic and high-frequency interference from being passed through to the power supply. Spike and transient suppression techniques are also used to minimise unwanted noise appearing in the audible frequency spectrum.

The DC supply fed between the PSU module and the phono stage is balanced and therefore exhibits excellent common mode noise rejection. The filtered DC is then regulated to ensure that regardless of voltage changes to the AC mains supply, the amplifier circuitry is run at a completely steady DC voltage.

Audition

The result of this attention to detail is a phono stage which massively improves the quality of vinyl replay and is far in advance of many more costly rivals.

The true test of any product is a personal audition and we invite you to contact us directly.

REVIEWS FOR THE Origin Live Discovery 2 Phono Stage

Review Quotes “The Discovery 2 phono preamplifier continues and amplifies Origin Live’s long-standing reputation for producing analogue playback gear that is first-class in musical communication and in ultimate sonics. Thus, it serves the needs of both Musicophiles and Audiophiles in equal measure. Its flexibility allows maximum information extraction from all types of phono cartridges. The Discovery 2 strikes me as a “final destination” phono preamplifier for serious music lovers. Given its exemplary performance, it is very reasonably priced, and is, thus, deserving of the most enthusiastic of recommendations.” – Read the full review > Stereo Times, Paul Zabady, August 2020

“Over the years I have had the opportunity to play with some of the greatest names in Hi-Fi equipment and have some in my own system, the Discovery 2 is up there with the very best and at a price that should embarrass all of them.” Read the full review >
Tony Sharman, Restek UK

Complete List of Discovery 2 Phono Stage Reviews

Specifications

Specification Details
Gain 46, 56, and 66 dB
Input Impedance 100, 240, 400, 820, and 47K ohms
RIAA Deviation 20Hz – 20kHz +/- 0.5dB
Noise 1nV per Hz squared
Power Consumption 2W
Dimensions 109 x 59 x 190 mm (W x H x D)
Mains Supply 230V or 110V (factory set)
Connections RCA phono input sockets, RCA phono output sockets (positive and negative phases), Ground terminal
Moving Coil Output Range 0.25-1mV
Recommended Input Impedance for Preamp or Amp 10K minimum to 200K (covers 99.9% of all amps)

Reviews

There are no reviews yet.

Be the first to review “Origin Live Discovery 2 Phono Stage”
×