Audiomica ANORT Consequence Ethernet Interconnect

Description

High End Audiomica Ethernet Cable Interconnect: ANORT Consequence

Anort Consequence is the highest quality Ethernet / Lan cable in the Audiomica Laboratory offer. The cable has been designed for Hi-end streaming systems and high-quality music servers. The base of the conductor is 8 wires made of copper OCC 7N, grouped in 4 pairs. Data transmission takes place in a closed system of triple shielding developed for high speed signal transmission. The cable was made based on the highest category 8.2 / class II (operating band: +2000 MHz). This means that the cable is adapted to work with the most demanding and advanced TCP / IP and UDP protocols, which enables the best video streaming in 4K, 8K and 10K + resolutions. Anort is compatible with earlier standards – high bandwidth is not a problem when operating category 6A.

The characteristics of TCP / IP transmission allow to correct any signal errors by replenishing data – missing or corrupted data packets are sent again. Streaming sound is distinguished by a single packet transmission, therefore missing data can not be completed. Therefore, the quality of the conductor is a great importance during audio streaming.

The cable is equipped with the highest quality Telegärtner RJ45 plugs with gold-plated pins and an antistatic sleeve by Acoustic Points, which provides excellent protection against static electrical changes. In addition, the antistatic material hides the original 3 core TFSS filter, minimizing interference and potential signal degradation.

The cable design includes a modern geometry of conductors and the use of the highest quality components developed especially for high frequency digital signals. The cable designed for the needs of the Consequence series guarantees the highest level of quality of multimedia content streaming. The signal transmitted by Anort is characterized by consistency. It shows a wide aspect of the sound containing the smallest details.

High End Filtering Systems

Enhance your signal protection with the anti-interference filters available on the Premium and Luxury version

DFSS | Double Filtering Signal System

Filter is the combination of capacity, ripple and induction filters. The task of the filter is to reduce a variable component in a voltage circuit and to move an input voltage closer to a fixed circuit. Filters use properties of inductive elements, which allows for an energy accumulation. The double-filter system consists of two ferromagnets. A precisely fixed space between them is separated by aluminium and Teflon and as a result lossless signal can be delivered. The key features are the composition of ferromagnets, their size, precisely fixed space between them and a distance to a plug. Moreover, the important part of the construction is ‘the divider’, which in this case is made of Teflon-and-PVC-covered aluminium tape.

TFSS | Triple Filtering Signal System

The bigger brother of the DFSS filter. The principle of his work is the same as in DFSS. We increased the amount of ferro-magnets from 2 to 3. The structure and size also changed. Magnets in this version have better anti-interference parameters. A great solution for more complex systems where the influence of the electromagnetic field on the transmission of lossless signals is greater. From the beginning of 2018, an additional option is a filter housing made of a patented electrostatic material.

Reviewed By…

Consequence Series – DTOWN (Hebrew): online

Consequence Series – Audio Video Magazine (Portuguese): pdf

Consequence Series – Mono and Stereo (English): online

Cables from Audiomica Laboratory – Positive Feedback (English): online