Mega Acoustic AcouSTAND

Description

The Mega Acoustic AcouSTAND

AcouSTAND universal panel, dimensions 120 x 60 x 21 cm –  an absolute hit in the offer, an excellent system combining acoustic properties with excellent appearance. The mounting system allows the system to be mounted on the wall in any orientation (horizontal/vertical), and its dimensions allow them to be placed one above the other directly on the floor. Acoustic properties are guaranteed by 15 cm of mineral wool, and an air gap of 2 to 6 cm depth additionally improves the operation of the system in low frequencies.

We offer the possibility of making non-standard finishes. At the customer’s request, we can also prepare a special type of front, e.g. with a company logo – please contact us.

Application

Acoustics in indoor spaces very often suffer from problems at low frequencies.

The panels are perfect for improving the acoustics of recording studios, control rooms, rehearsal rooms, offices, call centers, conference rooms, clubs, kindergartens, shopping malls or other more intimate rooms such as home theaters, listening rooms. For better clarity, dynamics and quality of music and any type of sound, they reduce reverberation and booming.

In small rooms, just one or two well-chosen systems can significantly change the room acoustics.

Design

Regardless of whether we plan to soundproof the walls, ceiling or floor, these are elements of our surroundings, which means that it will affect the appearance of our interior and, at the same time, our well-being.

Thanks to the wide range of sizes and thicknesses of the panels, as well as their rich colors, we can design compositions that will not only improve acoustics, but also create a unique, modern room design.

That is why we offer you the opportunity to use not only ready-made configurations of acoustic systems but also the ability to create your own individual/personalized panel combinations.

Use/Cleaning

Both hard and soft acoustic panels can be cleaned with a vacuum cleaner using a brush attachment.

Assembly advice

FiberStandard panels are excellent acoustic panels used to improve interior acoustics. The method of installing FiberStandard acoustic systems is independent of their dimensions and series (Standard, PRO, CC, MINI line and LITE line) and consists of installing (vertically or horizontally) on previously prepared wall mounting pins.

We advise you how to mount an acoustic panel on a wall so that it fulfills its function and also looks nice. All of our systems are with invisible mounting holes.

Step I – Determining the place of attachment of the system

We mark the mounting height on the wall – it is best to mark the middle of the panel. This height depends solely on our preferences.

Step II – measuring the spacing of mounting holes

We measure the spacing of the mounting holes on the rear side of the system.

Step III – Marking the mounting location of the handles

We mark the spacing on the wall. This way we have pre-designated mounting locations for the panel pins (holders).

Step IV – Checking the level

We use a spirit level to check whether the marked places are at the same level, and if necessary, we make corrections.

Step IV – Drilling holes

We drill holes. We match the drill diameter to the expansion bolt diameter. If the wall is made of a hard material (e.g. concrete), we use a hammer drill. It will be useful to have a second person help us, who will immediately collect the dust created during drilling with a vacuum cleaner.

Step V – Inserting the pins

We insert the expansion bolt and then screw in the screw.

Step IV – Hanging the acoustic panel with dowels    

We place the system on the mounting pins, trying to hit both pins at the same time.

Step IV – Done!   

To be sure, you can check again whether the system is hanging evenly. If so, you can enjoy improved room acoustics.